product description
Description
The WL5600-2 offers an output power of 2W (CW) with a transmission gain of typ. (Wird noch ermittelt) . A gain of typ. (Wird noch ermittelt) is achieved in the reception. The frequency range extends over the entire WLAN 5 GHz (5.180GHz – 5.825GHz) range. The unit is delivered in a mast housing. TRX and ANT are equipped with N-type female connectors. There is no separate input for the supply voltage. The supply may be provided via a remote switch, e.g. DCC 2,4 - 5,6 GHz. The remote switch is connected to the TRX input and requires 12V – 14V. The router is connected before the remote switch. The antenna is connected to the antenna input.
Connection plan:
The WL5600-2 is equipped with an automatic transmission / reception switch. If the TRX input is without power, the device is in the receive mode. In order to safely switch to transmission, the input should have a power of at least -10 dBm. It should also be noted that the maximum input power at TRX must not exceed (Wird noch ermittelt). The saturation effects of the receiving amplifiers start at -10dBm. This power should not be exceeded, as otherwise the data rade may drop.
The 5GHz WLAN frequency range is divided into two subbands:
Subband 1: 5,180GHz → 5,320GHz max output power: 200mW
Subband 2: 5,470GHz → 5,700GHz max output power: 1W
The device provides a higher output power in subband 1 than is permitted by law.
Summary of technical data
Frequency range |
5180 - 5825 MHz |
Receive gain |
Min. 15dB typ. 16dB |
Transmission gain |
Tbd. |
Ausgangsleistung max. |
2W (CW) |
Max Input Power Bias-T |
Tbd. |
Max Input Power Ant. |
Tbd. |
P1dB Output 1dB compression point (TX) |
Tbd. |
EVM |
Tbd. |
Operating voltage |
7 – 14 V |
Current consumption |
Max. tbd. |
Connection standard |
N - Buchse |
dimensions (LxBxH) [mm] |
164 x 90 x 120 |
Mast diameter |
max. 58mm |
weight |
Tbd. |
Supported standards |
IEEE802.11 a/n |