product description
Function description WL5600-1 PRO
The WL5600-1 PRO offers an output power of 1W (CW) with a transmission gain of typ. 27dB. A gain of typ. 17dB is achieved in the reception. The frequency range extends over the entire WLAN 5 GHz (5.180GHz – 5.825GHz) range. The unit is delivered in a robust IP65 aluminium housing. The device can be attached to a wall with screws. TRX and ANT are equipped with N-type female connectors. There is no separate input for the supply voltage. The supply may be provided via a remote switch, e.g. DCC 2,4 - 5,6 GHz. The remote switch is connected to the TRX input and requires 12V – 14V. The router is connected before the remote switch. The antenna is connected to the antenna input.
Connection plan:
The WL5600_1 is equipped with an automatic transmission / reception switch. If the TRX input is without power, the device is in the receive mode. In order to safely switch to transmission, the input should have a power of at least -10 dBm. It should also be noted that the maximum input power at TRX must not exceed 6dBm. The saturation effects of the receiving amplifiers start at -10dBm. This power should not be exceeded, as otherwise the data rade may drop.
The 5GHz WLAN frequency range is divided into two subbands:
Subband 1: 5,180GHz → 5,320GHz max output power: 200mW
Subband 2: 5,470GHz → 5,700GHz max output power: 1W
The device provides a higher output power in subband 1 than is permitted by law.
Technical data:
|
Frequency range: |
5180 - 5825 MHz |
|
Receive gain:: |
Min. 15dB typ. 16dB |
|
Transmit gain: |
Min. 25dB typ. 27dB |
|
Output power max.: |
30dBm (CW) |
|
Input power Bias-T: |
-10dBm, max. 6dBm |
|
Input power Ant: |
max. 0dBm |
|
P1dB Output 1dB compression point (TX) |
30dBm |
|
EVM: |
Max. 3% |
|
Operating voltage: |
7 – 14V |
|
Current consumption: |
Max. 1,3A |
|
Connection standard: |
N - Buchse |
|
Case: |
IP65 aluminium |
|
Dimensions: |
122mm x 151mm |
|
Supported standards: |
IEEE802.11 a/n |