product description
4 channel ICP2 COMBO (G3) programmers
The 4-channel ICP2-COMBO(G3) programmers are the premier tool for high-volume production environments. This high-speed production-grade programmer can expand to 64 channels through daisy chain configuration and is ideal for non-stop mass production operations. The programmers support popular programming interfaces, including ICSP, SWD, JTAG, UPDI, I2C, SPI, TPI, PDI, UART, Microwire, SWIM, SWI, BDM, C2, SBW, etc., and work with any silicon chip. It is currently used with Microchip, ST, NXP, Nordic, Cypress, Texas Instruments, Silicon Labs, GigaDevice, and other microcontroller vendors.
Key Features
Typical application
The 4-channel ICP2-COMBO(G3) is flexible and can expand to 64 targets, with a 16-box daisy chain.
1. Four targets true parallel programming
2. Single board with multiple targets
- Designed for ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc. used by Microchip, Atmel, SST and others
- Ultra fast programming of up to 64 channels simultaneously
- Built-in opto-relay barrier for target lines
- Galvanic isolation of control and communication lines
- LAN, USB and RS-232 interface
- On-board 32MByte flash memory per channel for non-volatile storage of HEX, configuration and serialization files (6 environments)
- Multiple serialization schemes: Sequential, random, pseudo-random and user file 1 to 8 bytes, automatic “retlw” or “raw data”
- Tests Vdd and Vpp for overload with indication by software
- Dimensions: 215 x 118 x 46mm
Programmable Hardware
- Wired remote programming and environment switch: Go/Pass/Fail/Env
- Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
- Programmable delay between Vdd and Vpp (0.1 to 250ms)
- Programmable clock/data speed (500KHz to 10MHz)
- Programmable Vdd source: ICP2-COMBO(G3) or target
- Vdd current limit: 250mA per channel
- Prevents damage to connected microcontroller in case of power ON and power OFF
Download Flyer (Softlog)
ICP Documents (Softlog)