RigExpert AA-170

Product.Nr.: 4007

EUR 529,00
incl. 19 % VAT

product description

RigExpert AA-170 is a powerful antenna analyzer designed for testing, checking,
tuning or repairing antennas and antenna feedlines. Graphical SWR (Standing Wave Ratio)
and impedance display are key features of this analyzer which significantly reduce
the time required to adjust an antenna. Easy-to use measurement modes, as well
as additional features such as connection to a personal computer (to plot Smith
diagrams, etc.), make RigExpert AA-170 attractive for professionals and hobbyists.


Frequency range: 0.1 to 170 MHz
Frequency entry: 1 kHz resolution
SWR measurement range: 1 to 10
SWR measurement for 50 and 75-Ohm systems
SWR display: numerical or easily-readable bar
R and X range: 0…1000, -1000…1000 in numerical mode,
0…200, -200…200 in graph mode

Display modes:

- SWR at single or multiple frequencies
- SWR, return loss, R, X, Z, L, C at single frequency
- SWR graph, 100 points
- R, X graph, 100 points

RF output:

- Connector type: UHF (SO-239)
- Output signal shape: rectangular, 0.1…30 MHz. For higher
frequencies, third or fifth harmonics are used.
- Output power: about -10 dBm (at 50 Ohm load)


- Three 1.5V, alcaline batteries, type AA *
- Three 1.2V, 1800…2700 mA·h, Ni-MH batteries, type AA *
- Max. 3 hours of continuous measurement, max. 2 days in stand-by
mode when fully charged batteries are used
- When the analyzer is connected to a PC or a DC adapter with USB
socket, it takes power from these sources


- 128x64 graphical backlit LCD
- 6x3 keys on the water-proof keypad
- Multilingual menus and help screens
- USB connection to a personal computer

Dimensions: 22·10·3.6 cm (9·4·1.5”);
Operating temperature: 0…40 °C (32…104 °F)
Weight (including batteries): 400g (14 Oz)

Batteries are not included with the analyzer. Users can purchase these batteries with
a corresponding charging adapter.