product description
The SP 600 S is a selective receiving preamplifier with transmit / receive switching. It offers a low noise figure and good large-signal behavior. In the case of low transmission powers, the transmit / receive switchover can be implemented using a built-in HF VOX circuit. This amplifier is built with a GaAs MMIC of the latest technology on a high quality microwave substrate in SMD technology. The band pass at the output of the amplifier ensures a good band selection so that all signals that are outside the useful band are effectively suppressed and do not overload the receiver used. This amplifier has a splash-proof, UV-resistant plastic housing and galvanized mast clamps with stainless steel screws for attachment to the antenna mast.
Technical data | SP 600 S |
Frequency range: | 50-52 MHz |
Noise figure (20°C, NF): | 0,6 dB |
Gain (+/-1%) (S21): | 18 dB |
Max. switching capacity with RF VOX: | 200 W PEP 100 W CW, FM, WSJT, FT8 |
Transferable power when using a sequencer: | 750 W PEP 400 W CW, FM, WSJT, FT8 |
Insertion loss: | 0,04 dB |
Return loss when transmitter is active: | 45 dB |
Input return loss (S11): | 25 dB |
Output return loss (S22): | 30 dB |
Output IP3: | 24 dBm |
Input IP3: | 7 dBm |
Supply voltage: | 12V...15V |
Current consumption: | 130...150 mA |
Mast diameter: | max. 58 mm |
Weight: | 540 g |